E295 E360 steel angle iron
E295 E360 angle iron
E295 is equivalent to domestic Q295A low alloy high strength steel, E295 is a general purpose construction steel. It is suitable for wear and strength loaded construction components (bolts, shafts, spindles, wedges).
E360 is a kind of unalloyed structural steel, the "E" in its name stands for Europe, and through the number 360, you can understand that its minimum yield strength is 360 MPa, which is a kind of medium-strength structural steel.
E360 structural angle's mechanical properties are more excellent, minimum yield strength of 360 MPa, ultimate tensile strength of 690-900 MPa, elongation of 18-22%, necking rate of 40-55%.
Because E360 structural steel angle has the advantages of high mechanical properties, low cost, good weldability and certain toughness, it has been widely used in many structural engineering. It is mainly used in various steel structures, such as bridges, buildings, industrial equipment, automobiles, mechanical equipment and other directions.
In addition, E360 metal angle has good weldability and is mainly used in electric arc welding, submerged arc welding and gas shielded welding.
China structural steel angle producers--GNEE Group
E295 E360 sheet metal angle
E295 metal angle iron Chemical composition: (%)
|
C |
P |
S |
N | ||||||
| 0.35 | 1.20 | 0.035 | 0.035 | 0.50 | 0.40 | 0.08 | 0.30 | 0.020 | 0.012 |
E360 angle steel beam Chemical composition: (%)
|
C |
P |
S |
V | ||||
| Less than or equal to 0.22 | 0.6-1.7 | Less than or equal to 0.045 | Less than or equal to 0.045 | Less than or equal to 0.35 | 0.05 | Greater than or equal to 0.02 | Less than or equal to 0.03 |
China structural angle makers--GNEE Group
China angle bar makers--GNEE Group
Cim npe nrov: e295 e360 angle steel, China e295 e360 angle steel manufacturers, suppliers, factory